.

 

The Field Gravel Road Test Kit

 

.

The Field Gravel Road Test Kit allows materials grading, cohesion (liquid limit and linear shrinkage), compacted strength and aggregate strength of the borrow material to be determined.
The thickness probe and RCCD in the kit ensure construction quality assurance.

The kit is designed to make use of local water and solar energy (solar oven and calculator) and therefore does not require electricity and running water to be available.

 
   

 
         
 

There are no installation requirements as all the components in the kit are already assembled and can be used immediately.
A manual describing the step-by-step test methods with result worksheets and practical guidelines is supplied with every kit.

  

 
 

Benefits and Function:

The performance of a gravel road is primarily a function of the material selected, as well as testing and control of constructed layer work.

The field test kit enables the practitioner to evaluate materials for use as wearing course on unsealed roads and to ensure that the quality of the construction is appropriate.

The function and objective of the travel gravel roads field kit is to enable the practitioner to perform certain basic tests on materials in the field, without the back up of a soils laboratory.

Operational limitations

The kit has been developed specifically for evaluating gravel roads and therefore does not contain the required tests to evaluate bituminous surfaces.
Layerwork underneath bituminous surfaces can be evaluated to an extent.

 

Installation requirements

There are no installation requirements as all the components in the kit are already assembled and can be used immediately.

No special equipment or tools are needed for installation.

Operational requirements

The methods for performing the various tests are all covered in detail in the operational manual

The following tests / properties can be performed / evaluated using the kit:

  • Grading analysis
  • Liquid limit test
  • Linear shrinkage test
  • Compacted strength (by RCCD)
  • Aggregate strength (Treton test)
  • Construction quality (refer to RCCD specification) 
 
 

.....

 

.....

 
   

General calibration procedure

No calibration or date acquisition system is required.

All data measured is logged onto the supplied worksheet.

   

Standard documentation supplied

A manual describing the step-by-step test methods with result worksheets and practical guidelines is supplied with every kit.

The specifications for the RCCD should be read in conjunction with specifications.

 
 

.....

 

 

.....

 

 
  Option 1
  • Canvas sheet for quartering sample
  • 5 test sieves with pan and cover
  • Balance with levelling platform and windshield
  • 2 stiff and 2 soft brushes
  • 5 pans
  • 3 shrinkage moulds
  • Steel rule
  • Spatula
  • Drop cone apparatus
  • Silicone spray
  • Water bottle
  • Thickness probe
  • Clip board with result worksheets and manual
  • Solar oven in separate steel trunk
  Option 2

Treton hammer plus option 1

Option 3

RCCD (Rapid Compaction Control Device) plus option 2

 
         
 

Back to CSIR Licensed Products Back to CSIR Licensed Products

 

Download brochures in PDF format for printing.
Download the Gravel Roads Test Kit.pdf file (163 Kb)

 
 

 

 
     



  For further product information: Please mail to: EquipmentSales@dynatest.com  



  Dynatest  

Dynatest International A/S
Rev. 040101-10

 

Back