| |
|
|
|
|
|
The Compact 15 for the
Dynatest FWD &
HWD
|
| |
|
|
|
|
| |
The new Compact 15 (CP15) embedded PC
control and signal processing unit has been designed and developed using
the latest technology and replaces the joint functionality of the
Dynatest 9000 System Processor, the Trailer PCB and the Hydraulic
Connection Box.
The CP15 can be fitted into the
existing FWD and HWD trailer control box, allowing all owners to upgrade
from the exiting trailer connection electronics and 9000 processor to
the CP15.
|
|
| |
|
|
| |
|
|
|
|
| |
Advantages:
|
|
|
|
| |
The CP15 allows up to 15 deflection
sensors (geophones) to be used simultaneously.
Time histories can now be collected
on all 15 deflection channels simultaneously in time windows ranging
from 40 to 200 msec.
The system is capable of storing histories for up to 400 msec when
the data is required for special research needs and for undertaking
dynamic analysis.
A new sampling circuit has improved resolution in time from typical
0.1 msec to 0.05 msec independent of the number of channels in use.
The high speed network connection allows for rapid transfer of the
increased volume of time history data.
|
|
The Multi-Signal Cable and the DMI cable have been replaced by a
single network cable providing much faster transfers between the
CP15 and the computer in the tow vehicle. |
|
| |
Two auxiliary power outputs have
been added to allow the operator to activate optional devices from
within the vehicle cab.
These could be any device activated by a
voltage switch, for example a paint sprayer.
There is a separate
power output to attach a beacon or hazard warning system.
The interior of the CP15 has a
thermostatically controlled cooling and heating device to help
maintain operational temperature within the CP15, critical when
operating in extreme climates.
The feature will also extend the life
of the electronic components.
.
|
|
Dynatest Model 8082 Heavy
Weight Deflectometer
|
|
| |
Maintenance
and Safety
Should there be a problem with the embedded PC system, an Emergency
Override switch will bypass the electronics to enable the plate to
be raised to transport position to allow maintenance to occur in a
safe area away from the traffic.
|
|
.
All hydraulic valves and status
sensors now plug directly into the CP15, making maintenance and
replacement easier.
COM 1 & COM 2 ports allow for the
CP15 to be interrogated during setup and can be used for diagnostic
purposes.
On the CP15 panel LED's display
voltages out-of-range and activation status of all sensors and power
outputs.
New safety features have been
enhanced to improve the safety of the operator while working on the
trailer undertaking manual operation and maintenance.
|
|
| |
Dynatest Model 8000 Falling Weight
Deflectometer
|
|
Upgrades
The CP15 can be fitted into the
existing FWD and HWD trailer control box, allowing all owners to
upgrade from the exiting trailer connection electronics and 9000
processor to the CP15.
|
|
| |
|
|
|
|
| |
.
.
|
|
.
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
Click here for
Equipment Service and Support Departments
|
|
Download brochures in PDF format for printing.
The
Compact15.pdf
file (104 Kb) |
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
Dynatest
International
rev. 040101-10 |
|